MOGAMI 2524 terminated Angle-Jack/jack NEUTRIK
NEUTRIK terminated High Impedance Transmission Musical Instrument Cable with Angled Jack and Straight Jack | Gold-plated Contacts
Se effettui un ordine superiore a € 300 con due o più prodotti, la spedizione sarà gratuita. Le tempistiche stimate di spedizione sono indicate.
Paga in modo semplice e sicuro con Carta di credito, Contrassegno, AMEX, PayPal e Bonifico bancario. La tua privacy è garantita da connessioni sicure.
Tutti i prodotti sono coperti da Garanzia convenzionale di 2 anni. Risolviamo problemi di qualsiasi natura con professionalità e correttezza.
Solo tramite eMail dal Lunedì al Venerdì dalle ore 9:30 alle 15:00.
High Transmission Impedance Musical Instrument Cable handcrafted in our workshop with NEUTRIK with NP2RX-B Angled Jack (source) and NP2X-B Jack (receiver) or Jack (source), Angled Jack (receiver) by selecting the option under the drop-down menu.
If two pieces are purchased, the second will be supplied with the connector colouring in red.
Available lengths can be selected from the drop-down menu.
MOGAMI PLATINUM Series Cable
Most pick-up sound musical instruments, such as electric guitars, basses or keyboards, are composed of high-impedance circuits driven primarily by voltage, with little electrical current flow. This is why handling noise (microphonics) can be a problem for guitar cables. This type of noise is caused by the slight voltage that is generated when a cable is bent or stepped on. Guitar cables, and similar instruments, must be designed to avoid this type of problem, which is why a conductive PVC layer is placed under the conductor's shield so that this voltage can flow out. Note: This conductive layer must be removed during cabling, otherwise only a partial result may be obtained.
CONNECTORS
Neutrik NP2X-B
Neutrik NP2RX-B
Also available finished in different configurations and customised sizes. Contact us for a quote!
Conductors:
- Details 50/0.12A
- Size (mm²): 0.565mm² (20AWG)
Insulation:
- Diameter (mm) 2.7Ø
- Material PE
- Colour Transparent
Shielding:
- Diameter (mm) 3.3Ø
- Conductive Material PVC (Carbon PVC)
- Colour: black
- Main Shielding-Shielded Approx. 55/0.18A
Outer Sheath
- Diameter (mm): 6.0Ø
- Material: PVC
- Colour: Black
- Roll dimensions 100m / 200m
- Weight per 100m roll 5,1Kg
ELECTRICAL AND MECHANICAL CHARACTERISTICS
- DC Resistance at 20°C
Inner Cond. 0.033W/m
Shield 0.014W/m - Capacitance at 1kHz, 20°C 130pF/m
- Inductance 0.2µH/m
- Electrostatic Noise:** 0.15mV Max.
- Electromagnetic Noise** 0.07mV Max. At 10kHz*
- Microphone with 50KW load 0.3mV Max.
- Insulation Resistance 100000 MW × m Min. at DC 500V , 20°C
- Flexural life** 15,000 cycles
- Tensile strength 578 N (26°C, 65%RH)
- Non-emigrating to ABS
- Applicable temperature -20° +70°C