WBT-0763

Set of 4 High Quality Gold Plated Copper Binding Post Clamps. Solder or crimp connection. Screw set not included

A standard binding post for many amplifiers and speakers from high-end companies. This connector features a patented rotating collar design that only requires tightening to securely attach the fork. Capable of handling 200 amps of continuous current, this is the right size binding post for almost any application. Screw set not included.

Midline Pole Terminal made of copper alloy, high-pressure contact for forks thanks to a fine thread with milled grooves. Maximum constant current: 70A. Two clamping nuts for optimum connection strength, solder or crimp connection with Torx T.6 screw (not included), puzzle plate system, 24k gold plating without use of nickel

DESCRIPTION

The clamping nut is designed to ensure a perfect grip. The gold-plated surface prevents any corrosion.

External connection >> 4 mm banana connector A 4 mm banana connector can be connected to the front of the clamping nut.

>> Fork and crimp cable ends (up to 6 mm²/9 AWG) The patented WBT clamping nut system can be used to make high-pressure connections of fork and crimp cable ends. The milled surface at the bottom of the pressure element creates a secure and permanent connection with extremely low transition resistance. In addition, it prevents the cable strands from breaking if bare cable ends are used.

Internal Connection Internally, cables with a conductor cross-section of up to 10 mm² (7 AWG) can be used. Connections can be soldered or crimped. For solder connections, WBT recommends WBT-0800 silver solder, which does not damage the surface. For crimp connections, an additional Torx T.6 screw is required.

Mounting Insulators are supplied and ensure not only insulated, but also torsion-proof and polarity-identifying mounting. Locknuts, double-step washers with lugs and mounting plates are also supplied. The jigsaw plates can be snapped onto each other. This guarantees a precise terminal spacing of 19 or 30 mm, but above all absolute protection against twisting. The nuts of devices with high levels of inherent mechanical vibration, such as loudspeakers, must be additionally secured, e.g. using the toothed washer WBT-9150. If a fixed distance of 19 mm is required, the WBT-9404 spacer can be used and the WBT-0763 installed as a double end cap. Thanks to the spacer's locking slots, the cable entry opening can be rotated by 45°.
*** Translated with www.DeepL.com/Translator (free version) ***